苯甲酸-Fenton体系荧光法测定中草药抗氧化活性

利用Feton体系产生羟自由基,能与苯甲酸反应生成具有强荧光的产物,加入抗氧化剂可有效清除羟自由基,导致体系荧光强度降低.据此建立了筛选抗氧化剂的荧光新体系.应用所建立的方法测定了葛根、吴茱萸和黄连三种常见中草药的抗氧化活性.结果表明,当中草药的浓度为0.4 mg(dry weight)/mL时,葛根、吴茱萸、黄连对羟...     

Disulfide bond cleavage in TEMPO-free radical initiated peptide sequencing mass spectrometry

The gas‐phase free radical initiated peptide sequencing (FRIPS) fragmentation behavior of o‐TEMPO‐Bz‐conjugated peptides with an intra‐ and intermolecular disulfide bond was investigated using MSⁿ tandem mass spectrometry experiments. Investigated peptides included four peptides with an intramolecular cyclic disulfide bond, Bactenecin (RLC RIVVIRVC R), TGF‐α (C HSGYVGVRC ), MCH (DFDMLRC MLGRVFRPC WQY) and Adrenomedullin (16–31) (C RFGTC TVQKLAHQIY), and two peptides with an intermolecular disulfide bond. Collisional activation of the benzyl radical conjugated peptide cation, which was generated through the release of a TEMPO radical from o‐TEMPO‐Bz‐conjugated peptides upon initial collisional activation, produced a large number of peptide backbone fragments in which the S? S or C? S bond was readily cleaved. The observed peptide backbone fragments included a‐, c‐, x‐ or z‐types, which indicates that the radical‐driven peptide fragmentation mechanism plays an important role in TEMPO‐FRIPS mass spectrometry. FRIPS application of the linearly linked disulfide peptides further showed that the S? S or C? S bond was selectively and preferentially cleaved, followed by peptide backbone dissociations. In the FRIPS mass spectra, the loss of ?SH or ?SSH was also abundantly found. On the basis of these findings, FRIPS fragmentation pathways for peptides with a disulfide bond are proposed. For the cleavage of the S? S bond, the abstraction of a hydrogen atom at C_β by the benzyl radical is proposed to be the initial radical abstraction/transfer reaction. On the other hand, H‐abstraction at C_α is suggested to lead to C? S bond cleavage, which yields [ion ± S] fragments or the loss of ?SH or ?SSH. Copyright © 2011 John Wiley & Sons, Ltd.     

Antimicrobial and hemolytic activities of copolymers with cationic and hydrophobic groups: a comparison of block and random copolymers

Random and diblock copolymers of 2-(N,N-dimethylamino)ethyl methacrylate and butyl methacrylate are prepared by ATRP. As mimics of cationic antimicrobial peptides, the random and diblock copolymers show similar antimicrobial activities. In contrast, the diblock copolymers have much lower hemolytic activities than the random copolymers. The cell selectivity (HC(50)/MIC, where HC(50) is the concentration to lyse 50% of human red blood cells and MIC is the minimum concentration to inhibit bacterial growth) of the diblock copolymers are 150 to 27,500 times higher than that of random copolymers with similar compositions.     

Polyaspartamide-graft-polymethacrylate nanoparticles for doxorubicin delivery

A new PHEA‐IB‐PMANa⁺ copolymer has been synthesized and its pH‐induced self‐assembly has been investigated in an aqueous medium. PHEA‐IB‐PMANa⁺ formed nanoparticles with diameters from 25 to 50 nm upon protonation of the carboxylic acid moieties dislocated along the grafted polymethacrylate sodium salt side chains. The physico‐chemical characterization of the nanoparticles was performed using light scattering, zeta‐potential measurements, SEM, and AFM. Doxorubicin‐loaded nanoparticles were prepared and drug release profiles were evaluated under conditions mimicking physiological media. A biological characterization was carried out by testing the cytotoxicity on Caco‐2 cells, and cellular uptake on mouse monocyte macrophage (J774 A.1) and Caco‐2 cells.

     

Thermo-responsive polymer brushes as intelligent biointerfaces: preparation via ATRP and characterization

PIPAAm-brush grafted glass substrates with various graft densities and chain lengths were prepared via surface-initiated ATRP. Temperature-dependent physicochemical properties of the surfaces were characterized by means of ATR/FT-IR spectroscopy, XPS, AFM, and contact angle measurements. ATRP conditions influence the amount of grafted PIPAAm and the surface wettability and roughness of the substrate. Fibronectin adsorption and EC adhesion increased with decreasing density of PIPAAm brushes. EC adhesion was diminished with increasing PIPAAm graft length. Thus, the preparation of PIPAAm brush surface with various graft densities and chain lengths using the surface-initiated ATRP is an effective method for modulating thermo-responsive properties of surfaces.     

Image printing on the surface of anti-biofouling zwitterionic polymer brushes by ion beam irradiation

A CMB monomer was polymerized on a glass plate with a surface-confined ATRP initiator containing a 2-bromoisobutyryl group. The glass plate modified with a PCMB brush was highly hydrophilic and showed a strong resistance against non-specific adsorption of proteins and cell adhesion. Upon ion beam irradiation, furthermore, the PCMB brush was ablated and a hollow space with a designed shape could be made to which HEK293 cells (from human embryonic kidney) and Hep G2 (from human hepatoma) cells non-specifically adhered, while no adhesion of these cells to the non-treated area on the brush was observed. The present results clearly indicate the usefulness of ion beam-printed patterns of anti-biofouling zwitterionic polymer brushes in the biomedical field.     

The combination of living radical polymerization and click chemistry for the synthesis of advanced macromolecular architectures

Since its introduction, click chemistry has received a considerable amount of interest. In this contribution, the term click chemistry and the reactions that fall under this term are briefly explained. The main focus of this review is on the application of click chemistry in conjunction with living radical polymerization for the synthesis of advanced macromolecular architectures. Therefore the most powerful living radical polymerization (LRP) techniques are discussed and an overview of click chemistry in the different synthetic schemes is given. A large number of examples are shown that include the synthesis of block copolymers, star-shaped polymers, surface modified particles, and polymer-protein conjugates. The enormous potential of LRP/click chemistry is probably best exemplified by the synthesis of different miktoarm star copolymers, to which a separate section is dedicated.     

Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution

A series of poly(sodium styrene sulfonate)-b-poly(methyl methacrylate), PSSNa-b-PMMA, amphiphilic diblock copolymers have been synthesized through atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N,N-dimethylformamide/water mixtures, starting from a PSSNa macroinitiator. The kinetics of the polymerization was followed by ¹H NMR, while the chemical composition of the copolymers was verified by a variety of techniques, such as ¹H NMR, FTIR and TGA. The MMA content of the copolymers ranges from 0 up to 60 mol%, while the number–average molecular weight of the PSSNa macroinitiator was 9000 g/mol. The self-association of the diblock copolymers in aqueous solution was compared to the respective behavior of similar random P(SSNa-co-MMA) copolymers through optical density measurements, pyrene fluorescence probing, dynamic light scattering and surface tension measurements. It is shown that the diblock copolymers form micellar structures in water, characterized by an increasing hydrophobic character and a decreasing size as the length of the PMMA block increases. These micelle-like structures turn from surface inactive to surface active as the length of the PMMA block increases. Moreover, contrary to the MMA-rich random copolymers, the respective diblock copolymers form water insoluble polymer/surfactant complexes with cationic surfactants such as hexadecyltrimethyl ammonium bromide (HTAB), leading to materials with antimicrobial activity.     

Products formed at intermediate stages of electrochemical perfluorination of propionyl and n-butyryl chlorides. Further evidence in support of NiF3 mediated free radical pathway

The partially fluorinated HF soluble intermediates formed during the electrochemical perfluorination of propionyl chloride (PC) and n-butyryl chloride (n-BC) were analyzed after passing 0%, 25%, 50%, 75% and 100% of theoretical charge required for the fluorination of PC and n-BC. The acid fluorides formed were converted to their corresponding sodium salt by alkali treatment and were separated by methanol extraction. The methanol was subsequently removed from the extract by vacuum distillation and the residue containing partially fluorinated sodium carboxylates was analyzed using ¹⁹F and ¹H NMR spectra. Initial perfluorination on activated electrode surface indicates the operation of ‘zipper-mechanism’. Formation of partially fluorinated product mixture, initial selectivity towards primary and secondary carbon, carbon chain isomerization and formation of cleaved and coupled products support the general operation of free radical pathway in the overall electrochemical process.     

Direct dynamics study on mechanism and kinetics of the biradical self‐reaction of HOO

A theoretical study of the mechanism and the kinetics for the hydrogen abstraction reaction of the biradical hydroperoxy radical has been presented at the CCSD(T)/6‐311++G(3d,2p)//CCSD/6‐31+G(d,p) level of theory. Our theoretical calculations suppose a stepwise mechanism involving the formation of a postreactant complex in the triplet and singlet entrance channels. Four transition states of the six‐membered chain complexes (³TS1 and ¹TS1) and six‐membered ring complexes (³TS2 and ¹TS2) are located at the high dual level CCSD(T)/6‐311++G(3d,2p)//CCSD/6‐31+G(d,p) method. The rate constants of Path 1 ～ Path 4 at the CCSD(T)/6‐311++G(3d,2p)//CCSD/6‐31+G (d,p) level are calculated by means of the conventional transition state theory (TST) and canonical variational TST without and with small‐curvature tunneling (SCT) correction within the temperature range of 200–2,500 K. The calculated results show that the triplet channel is the dominating reaction channel and Path 2 is found to be the most favorable pathway. The rate constants of Path 2 are in good agreement with the experimental values at the experimentally measured temperatures. Moreover, the variational effect is not obvious in the low temperature range but is not neglectable in the high temperature range. The SCT plays an important role particularly in the low temperature range. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011